As for the cost building of a long-time and high-temperature operation fuel oil incinerator, the general protection and maintenance of the fuel oil incinerator is very tight. The bio fuel incinerator supplies heat energy to all the production lines. If it hinders the shutdown, the production of the live water line will also stop working, so that the general protection and maintenance of the bio fuel incinerator is very tight, and the low bio fuel incineration The obstruction rate of machine promotes the reliability of its function, and increases the obedience of processing and manufacturing, which brings benefits to the enterprise. When the machinery is first burned, it is necessary to burn it in gear 1 or 2 for 5-10 minutes, and then increase the gear for burning.
Pay attention to the cost of fuel oil incinerator: 1. Before application, pay attention to clearing the ashes in the clean furnace. The connection in the furnace shall be dry and there shall be no signs of moisture and ponding. 2. Before feeding, be sure that there are no metal parts or other sundries in the screw and bin. The sundries and ashes in the incineration tank must be cleared and cleaned. Cover the bin cover after feeding. 3. When the new machine is applied for the first time, there will be a small batch of pungent smoke (rust proof oil in the sheet metal and paint volatilization on the machine occurs), which will be actively dissipated after burning for a period of time. 4. Do not open the ash cleaning door when the machine is normally burned. Air leakage will affect the normal burning after opening.
Low NOx precombustion chamber incinerator precombustion chamber is a high compliance, Shaanxi Huayi transportation | fuel oil incinerator low NOx staged incineration technology developed and researched in recent 10 years. The precombustion chamber is generally composed of primary air (or secondary air) and fuel radiation system, and the fuel and primary air are mixed rapidly, causing fuel rich inclusions in the primary combustion area of the precombustion chamber. Because of lack of oxygen, it is only one-sided combustion In order to reduce the production of NOx, the fuel is burned and volatiles are separated out in the primary flame area with poor oxygen and low flame temperature. According to the burning mastering methods of the fuel oil incinerator of the incinerator: single stage fire incinerator, double stage fire incinerator and proportional adjustment incinerator.
The protection and maintenance of natural gas incinerator should start with the main gas source, filter, regulating valve, incinerator and other joints. Main gas source of natural gas incinerator - as for the cost of the fuel oil incinerator with natural gas as fuel, the oil nozzle is installed on the axis of the air conditioner to atomize the oil into fine drops, spray it into the incineration room at a certain dispersion angle, mix it with the atmosphere sent by the air conditioner, and then burn it. Do not adjust the regulating valve of the gas company. The gas company will help flush, protect and adjust the regulating valve of the main gas source. If any sensor is clear, check whether it is damaged.
The protection method of the incinerator and the other one-sided blending incinerator of the system includes the commissioning of the incinerator. The excellent commissioning of the incinerator will carry forward higher things to obey. Portable incinerator instruction instrument can provide accurate information of incinerator environment. The typical incinerator, Shaanxi Huayi transportation | fuel oil incinerator debugging skills include fuel description and a series of adjustment that can make the incinerator reach the best operating function under the environment of connected incineration power. Foreign matters are strictly forbidden to enter the air duct. The application site of methanol incinerator shall be kept away from inflammable and explosive materials and equipped with extinguishing buildings. According to the oil pressure, it is worth adjusting the oil pressure.
The fuel sample shall be extracted from the fuel barrel, so as to have a precise appearance of the business environment of Shaanxi Huayi transportation | fuel oil incinerator. The commissioning of the incinerator is based on the sampling information of the incineration flue gas. Any adjustment to the atmosphere and fuel oil will affect the flue gas emissions. The flue gas factors can be studied to explain the compliance of incineration. The incineration products and their causes are listed below. A disciplined method of incinerator protection is very necessary to avoid work stoppage and extend the life of the incineration system. Connecting a few steps enumerated above with the initiation proposed by the fuel incinerator manufacturer can determine a useful protection method. In this way, not only can it become lost due to the hindrance of work stoppage and after-sales, but also it can improve the incineration and obey the thrifty fuel cost.
——Author：ebico