The bag type dust remover of mineral material heating asphalt mixer intelligently grasps the incinerator, then transports its temperature light to the instrument and grasps the temperature within the limit of locking. The instrument is equipped with manual operation. When the two active conditions are in active condition, the temperature light supplied by thermocouple can be used to adjust the opening of throttle breeze door. The temperature is fixed within the set limit manually.
Mastering the process of negative pressure at the front end of the dry cylinder mastering the instrument is an electric contact negative pressure meter with high and low limit pointer that can experience it to set its high and low limit for mastering the negative pressure value at the front end of the dry cylinder. The principle is to set the high and low limit of negative pressure value within certain limits to experience the high and low changes of negative pressure value and change the switch light input of its electric contact.
The output light number controls the electric pusher of the induced draft fan damper, so as to adjust the opening of the damper, ensure the negative pressure value, within the set limits, and make the flame in the superior incineration situation to improve the incineration compliance. The incinerator selection plan, the incinerator is a link part, its quality not only affects the environmental protection function of the mixer, but also determines the output and product quality of the mixer to build a good incinerator The burners must have the following premises: thrifty power, sufficient fuel, atomization and incineration, easy to adjust and active control of adjustment limitations, which can meet the requirements of different working conditions.
According to the above three premises, we choose the incinerator. The reason is that the air oil ratio is adjusted by the linear flow oil valve and the non-linear air volume damper. Through the cam and the connecting rod installed on the adjustable curved surface of the servo electric idea, the throttle linkage of the damper is completed.
——Author：ebico