As for the cost construction of a long time and high temperature operation fuel oil incinerator, the cost of fuel oil incinerator is very tight in the general protection and maintenance of the bio fuel incinerator. The bio fuel incinerator supplies heat energy to all the production lines. Once it hinders the shutdown, the production line will also stop working, so as to do a good job in the general protection and maintenance of the bio fuel incinerator, which is very tight, and the bio fuel incinerator is in a low level The hindrance rate of burning machine promotes its reliable function, which increases the obedience of processing and manufacturing, and brings benefits to the enterprise. When the machinery is first burned, it is necessary to burn it in gear 1 or 2 for 5-10 minutes, and then increase the gear for burning.
Pay attention to the cost of fuel oil incinerator: 1. Before application, pay attention to clearing the ashes in the clean furnace. The furnace is connected to dry without signs of moisture and water accumulation. 2. Before feeding, be sure that there are no metal parts and other sundries in the screw and bin. The sundries and ashes in the incineration tank must be cleared and cleaned. After feeding, cover the bin cover. 3. During the first application of the new machine, there will be a small batch of pungent smoke (rust proof oil in the sheet metal and paint volatilization on the machine), which will be actively dissipated after burning for a period of time. 4. Do not open the ash cleaning door when the machine is normally burned. After opening, air leakage will affect the normal burning.
Low NOx precombustion chamber incinerator precombustion chamber is a high compliance, Shaanxi Huayi transportation | fuel oil incinerator low NOx staged incineration technology developed and researched in recent 10 years. The precombustion chamber is generally composed of primary air (or secondary air) and fuel radiation system, and the fuel and primary air are mixed rapidly, causing fuel rich inclusions in the primary combustion area of the precombustion chamber. Because of lack of oxygen, it is only one-sided combustion In order to reduce the production of NOx, the fuel is burned and volatiles are separated out in the primary flame area with poor oxygen and low flame temperature. According to the burning mastering methods of the fuel oil incinerator of the incinerator: single stage fire incinerator, double stage fire incinerator and proportional adjustment incinerator.
The protection and maintenance of natural gas incinerator should start with the main gas source, filter, regulating valve, incinerator and other joints. Main gas source of natural gas incinerator - as for the cost of the fuel oil incinerator with natural gas as fuel, the oil nozzle is installed on the axis of the air conditioner to atomize the oil into fine drops, spray it into the incineration room at a certain dispersion angle, mix it with the atmosphere sent by the air conditioner, and then burn it. Do not adjust the regulating valve of the gas company. The gas company will help flush, protect and adjust the regulating valve of the main gas source. If the sensor is clear, check whether it is damaged.
The protection method of the incinerator and the other one-sided blending incinerator of the system includes the commissioning of the incinerator. The excellent commissioning of the incinerator will carry forward higher things to obey. Portable incinerator instruction instrument can provide accurate information of incinerator environment. The typical incinerator, Shaanxi Huayi transportation | fuel oil incinerator debugging skills include fuel description and a series of adjustment that can make the incinerator reach the best operating function under the environment of connected incineration power. Foreign matters are strictly forbidden to enter the air duct. The application site of methanol incinerator shall be kept away from inflammable and explosive materials and equipped with extinguishing buildings. According to the oil pressure, it is worth adjusting the oil pressure.
The fuel sample shall be extracted from the fuel barrel, so as to have a precise appearance of the business environment of Shaanxi Huayi transportation | fuel oil incinerator. The commissioning of the incinerator is based on the sampling information of the incineration flue gas. Any adjustment to the atmosphere and fuel oil will affect the flue gas emissions. The flue gas factors can be studied to explain the compliance of incineration. The incineration products and their causes are listed below. A disciplined method of incinerator protection is very necessary to avoid work stoppage and extend the life of the incineration system. Connecting a few steps enumerated above with the initiation proposed by the fuel incinerator manufacturer can determine a useful protection method. In this way, not only can it become lost due to the hindrance of work stoppage and after-sales, but also it can improve the incineration and obey the thrifty fuel cost.
——Author：ebico