Study for a variety of dynamic unity adjustment.Study on the unity and optimization of operation of combustion electricity and renewable power, and request the renewable power plant and thermal power plant to form a unity regulating unit, in which thermal power supplies peak shaving and frequency modulation for the renewable power plant.Unity adjustment unit external as a whole into the power situation trend and take over the power grid adjustment agency instructions.Hydropower is the main while wind power, photovoltaic power generation areas, as well as wind power, photovoltaic at the same time intensive development of the area, the pilot can be requested according to the region in order to avoid a variety of power supply and operation of unity adjustment unit.Instigated new nuclear power projects to connect the inland reality, supporting the construction of pumped storage energy and other peak regulating power supply.
In broad sense burner viewpoint, domestic water heater, gas range, even lighter can feel to be burner probably one kind.In its way, a burner can be roughly defined as a building that converts heat by the chemical feedback method of material combustion -- mixing the atmosphere with the fuel through premix assembly in a proper proportion to allow it to burn.Burners can be classified in a variety of ways.According to the fuel method, divided into: fuel burner, gas burner, light oil burner and dual fuel burner.This: in the detailed use, the fuel burner will be divided into light oil burner, heavy oil burner, etc.Gas burner is divided into natural gas burner, metropolis gas burner and so on.According to the combustion control methods of the burner, the single-stage burner, double-stage burner and proportional recuperation burner are respectively.According to the fuel atomization method: machine atomizer burner, medium atomizer burner;According to the layout are: integral burner and split burner.This split type burner is important for industrial production, its important characteristics are combustion system, air supply system, master system, etc., in contrast, the role of trade burner for mass production production, and trends in the supply chain professional level request is not high, the product of trends in selling costs relatively low, and the split type burner for professional request is relatively high, and numerous professional put troops demand, trends in selling costs are compared to the relatively above many.
EBICO supplies light oil and heavy oil pump units with filters, pumps and heaters (heavy oil), filters and pumps together or two-way one-stand-one-use plan.The adoption of a two-way system ensures that the system is usually checked or found to be obstructed without impeding things.Heavy oil can be roughly electric, heat conduction oil, steam ring heating to achieve atomization required viscosity.
EBICO supplies safe light oil and heavy oil models with matching valve sets, fuel required for burner quick and active cutting valve, atomizing ring quick and active cutting valve, associated with oil gun purge quick and active cutting valve, pressure master, pressure gauge and temperature gauge (heavy oil only), modular plan for quick and light placement.
From the perspective of heat exchange calculation, it is necessary to increase the heat exchange surface, improve the heat exchange compliance of the heating surface, improve the heat exchange temperature difference of the cooling source at a lower temperature, and reduce the influence of erosion on the heat exchange compliance.As gas steam kettle host for starting content low nitrogen combustion furnace volume and flame size request, the second host of convection heating surface is a main export to low smoke temperature, average in 150 ~ 250 ° C, to survive the smoke temperature is too high growth together with the difficulty of flue heat preservation plan, smoke temperature is too low will cause wall condensation in furnace convection heating surface is caused erode, therefore, proper heating furnace domestic demand plan, the physical dimension more representative chamber size.To increase the heat exchange surface, it is important to think about increasing the heat exchange area of the building at the end of the boiler, which is more beneficial to the rapid lowering of the smoke exhaust temperature.Second, the lower inlet water temperature can be used for heat exchange temperature difference characteristics;Third, it can adopt corrosion-resistant materials to build and improve its service life.The new layout of efficient heat exchange should adopt such modes as staggered tube arrangement, efficient heat exchange finned tube and plate heat exchanger, increase the smoke disturbance and battle surface, reduce the smoke stratified heat resistance, advance medium and smoke heat exchange compliance.
Generally speaking, the building belongs to the hardware of energy-saving base, but the double important is the human element, a good management team, can roughly exercise the benevolent person to control every joint, in the operation of each energy-saving component, continue to summarize the management and control level of the progress team, this is the software.And an energy-saving management operation in the face of the company, not only face up to the construction of hardware and software in the face of more construction, they are supporting control high-grade attached to the machine control system, good appearance, have been supervised exercise the global flow very get really running data, attached to the machine system in a happy place, in the promotion of the artificial intelligence technology, will the parties face into the dispute machine in the French concession mind and exercise of new means of science and technology take the initiative to control each node, cut salaries turnovers, missed, accurate control the economic system running in high efficiency and energy saving status forever, with is,A comprehensive, reasonable and excellent computer control system is a very good object for human management.
Energy saving is a general project, each node should be controlled, the enterprise needs to invest a large number of manpower and material resources, the enterprise will continue to improve the level of management and management, but also continue to harvest energy saving and consumption reduction efficiency, open better economic benefits.
——Author：ebico