Fuel oil incinerator is a kind of incinerator with fuel oil as the main incineration material, which is mainly composed of fuel gasifier and air flow controller. Many people don't understand how to choose the fuel incinerator. To be precise, it can be used precisely.
Describe the operation process of the fuel burning machine below.
There are three things in the inspection before the attempt of the fuel burning machine:
1. Check whether the diesel engine is in place, whether the fuel pipe can be cleaned and opened, and whether the valve can be opened.
2. Can there be signs of pipeline venting and can the pipeline operation meet the requirements?
3. If the oil inlet and return pipes are operated accurately, the valve can not be operated once in the return pipe.
Product inspection of fuel oil incinerator:
1. Whether the nozzle of the fuel incinerator can be installed and the electrode can be ignited can be adjusted thoroughly.
2. Can the torque deviation of the motor of the fuel burning machine be accurate.
3. Can the external circuit of fuel incinerator be adjusted.
4. According to the clear situation, the cold simulation is carried out for the incinerator, aiming at whether the equipment in the construction, assembly and operation can live flat, whether the flame test and maintenance equipment can live flat.
Attempt of fuel oil incinerator:
1. Check whether the external diesel oil is in place, whether the pipeline is smooth, and whether the external power supply is in place.
2. The burden of the fuel oil incinerator has been passed down to small burden, and it is adjusted to small burden by clicking the seat, and the heavy load shrinks to point, aiming at the current situation of the flame. According to the flame mode, the servo motor or valve can be adjusted properly.
3. When the burning force of the fuel oil incinerator is high, the incinerator should adjust the burden of thermal construction and assembly from relatively small burden to large burden, and adjust and control the servo motor or valve appropriately.
4. Aiming at whether the flame can deflect, the flame is not very good to burn and vibrate.
5. After adjustment, it should be pointed out frequently to see if it can be done thoroughly.
——Author：ebico