Recent situation of product industry
There are two types of natural gas incinerators: Civil and industrial. Our people use burning buildings to develop rapidly. It's important to learn from Japanese and European products. There are certain differences between high-end products and excellent countries. However, in addition to a small number of imported entrance buildings, most of the industrial incinerators I developed are relatively backward. It is obvious that every year, tens of billions of natural gas can not be used up by civil use. At first, natural gas was used for power generation, followed by various industries. With the hope of natural gas engineering, a series of energy-saving and low pollution incinerators necessary for different processes should be developed. Make the enterprise not only affordable, but also improve the product quality. In this way, the natural gas will be delivered to the other side, where it can be digested on the spot, and the natural gas will be fully developed, which will bring about the economic and social benefits of people's economic growth. Therefore, it is necessary to improve the application technology of natural gas in China, and it is urgent to develop excellent incinerators.
Protection and maintenance
The protection and maintenance of natural gas incinerator should start from the main gas source, filter, master regulating valve, incinerator and other joints. Main gas source of natural gas incinerator - for the incinerator with natural gas as fuel, check the regulating valve of main gas source to ensure it is clear. Do not adjust the regulating valve of the gas company. The gas company will help flush, protect and adjust the regulating valve of the main gas source. If any sensor is clear, check whether it is damaged. Filter of natural gas incinerator - if "Y" filter is installed before mastering the regulating valve, pay attention to flushing. Master the regulating valve - check the regulating valve on the gas incinerator to see whether the regulating bolt is easy to adjust. It is concluded that all outlets and screens are not blocked. Incinerator - check the gas pipe group to confirm whether the adjustment of manual switch is vivid and whether the valve is located at the pain. Check whether the barometer is normal. When regulating the gas incinerator, the accurate pressure performance is very joint. Turn the low and high pressure switches to confirm their working environment. The continuous part of the air valve shall be flushed and smooth. If the continuous part is stuck or too rough, the appropriate accessories shall be replaced. If the incinerator is equipped with destructible pipeline, pay attention to flushing.
——Author：ebico