The temperature and pressure in the furnace are determined by the recorder. The manufacturer of the recorder must analyze the type of building his building belongs to. The pressure in the furnace is positive or pessimistic. How much pressure and how high the temperature reaches. Because of the example of furnace temperature, the layout of the incinerator is different. Different materials should be selected; the incinerator of the furnace is selected to reduce the furnace pressure of the low-pressure incinerator to a high pressure.
When the calorific value of the gas, the compressed air force body is selected as the fuel. Because the calorific value of many kinds of gas is different and the pressure is different, the appropriate incinerator is selected based on the analysis of the incinerator manufacturer who wants to select the fuel sample incinerator, the calorific value of the number and the pressure, so as to avoid the harm caused by inaccurate selection.
For the construction of temperature accuracy request for adjustment method, you can select a few fire control Masters (only one incinerator's control mode control point) in the second stage fire control (the incinerator event mode is small fire two event points, and the two event switching points suddenly change), line by line (small mode incinerator fire two event points, the switching between the two event points is greasy and gradual ), adjust the incinerator (any point within the limitation of the incinerator incineration mode can be left behind, and the average of the demand for the heating furnace output from the system).
If the atomization of heavy fuel oil is selected, the heavy oil incinerator can be selected based on the fuel oil of the machine atomizer, the incinerator f area of the medium atomizer, different ground conditions and different situations with the requested viscosity of different incinerators.
——Author：ebico