Structure features of low nitrogen incinerator:
1. The incinerator is of integral general assembly structure, with compact structure
2. The motor and impeller of the incinerator are coaxial and continuous, and the operation is safe and reliable
3. All fuel and atmosphere adjustment structures of low nitrogen incinerator are reasonable and clear, easy to operate
4. Through hinged flange, the incinerator can be opened left or right, which is convenient for maintenance and operation
5. Turn over the hinged flange, incinerator head, flame stabilizing plate, nozzle and electrode of the gas incinerator to see clearly.
The low nitrogen incinerator plant is exposed because the emission of thermal NOx is affected by the incineration temperature, oxygen concentration and calming down time. When the incineration temperature is lower than 1500 ℃, the production of NOx can not be monitored. When the incineration temperature is higher than 1500 ℃, the production rate of NOx increases exponentially and rapidly: the higher the oxygen concentration is, the higher the incineration temperature is, the greater the production of NOx is: the longer the incineration time is, the greater the production of NOx is.
The low nitrogen incinerator adopts the method of staged incineration and dense lean incineration: the combustion supporting air enters from the combustion supporting air inlet of the low nitrogen incinerator, and there are different combustion supporting air channels at the nozzle of the incinerator. For the low calorific value of the tail gas of Lancang carbon, this kind of low nitrogen incinerator is equipped with the areas of intermediate combustion supporting air (primary grading air), dense incineration swirl air (secondary grading air) and nitrogen incineration swirl air (tertiary grading air), which are divided and The corresponding three-stage gas area shall stop mixing, complete the thickening and dilution and staged incineration, and reach the goal of average furnace temperature field and low thermal nitrogen oxide.
The low nitrogen incinerator is based on the energy characteristics of axial wind and the principle of fuel staged replenishment. It uses the result of the combination of vortex and non streamline body to make the fuel and combustion supporting atmosphere spread evenly and complete the mixing of fuel and atmosphere at the same time, so as to make the flame temperature average and the generation of low thermal NOx.
The gas pipeline is caused by the main pipeline and branch pipeline, and the main pipeline of gas incinerator includes manual shut-off valve, pressure gauge, etc.
Incinerator has many kinds of classification methods according to its different properties. The low nitrogen incinerator factory shows that the incinerator with trade function is relatively low due to the mass production and the demand for professionalism in the situation trend supply chain. The situation trend selling cost of the product is relatively low, while the split incinerator is relatively high due to the demand for professionalism and numerous demands for professional placement troops. The situation trend selling cost is relatively higher than the same period last year Many.
Incinerator can be divided into several types, but each kind of cost and function is a little different. Nowadays, the country attaches great importance to environmental protection, so this kind of equipment must not be less, the geometric benefits of the incinerator.
1. The incinerator is environmentally friendly and will not produce geometric oil fume to pollute the situation. It is also a kind of guard for the situation.
Two incinerators are sufficient for burning and fuel saving:
3. The low nitrogen incinerator plant shows that the incinerator can save manpower and save a lot of unnecessary expenses. In the past, only one set of incinerator is needed to do one-sided work.
The low nitrogen incinerator factory shows that the role of the incinerator is to send fuel and atmosphere into the furnace one after another, reasonably structure the pulverized coal air flow, and make superior mixture, fast and solid ignition and incineration.
The application platform of the incinerator is very wide, and the products are widely used in the boiler, asphalt mixing station, oil field, incinerator, hot blast furnace, forging machine industry kiln and other supporting buildings of thermal energy machines. Only when the incinerator is used in the fire site, can the incinerator be used, and only the fuel that can be burned can also be used, so as to reduce the discharge of waste products and reduce the pollution of the situation.
——Author：ebico