The function upper wind of low nitrogen incinerator of natural gas burner
1. Integrated layout, built-in full electronic proportional adjustment system and parameter screen performance, complete man-machine dialogue.
2. The incinerator receives high temperature resistant stainless steel materials. The strange layout plan of the incinerator completes the staged incineration of atmosphere and gas. The high-speed jet of air at the exit of the flame tube causes part of the flue gas to rotate inside and lower the flame temperature
3. Receive flue gas recycling technology (FGR), greatly reduce NOx emission, NOx can reach 30mg / m3 as follows.
4. The pipeline in front of the incinerator is installed with sufficient clearance and inspection space, which is convenient and reliable after-sale.
5. The operation noise of the incinerator is small, and the exhaust emission meets the requirements of environmental protection.
6. The incinerator accepts German dons solenoid valve (including pressure regulating assembly), and each incinerator is equipped with a set of solenoid valve group and pipeline accessories.
7. The incinerator adopts the French mastering system of German lambtec.
8. The incineration compliance of the incinerator can reach 99.9%.
9. The incinerator shall ensure that the incineration is consolidated and efficient, ensure that the flame is not skewed under the operation condition, and ensure that the flame does not simply wash the pipe wall.
10. Incinerator fusion flame monitor.
11. The master system of incinerator includes: active leak detection of fuel system, purging before and after furnace, active combustion and French start stop, flameout guard, low pressure guard, safety interlock guard, incineration, load adjustment, etc.
——Author：ebico