Pulverized coal incinerator costs the characteristics of fuel oil incinerator, and fuel oil incinerator is therefore the main incineration assembly of fuel oil. Fuel oil (diesel, heavy oil, residual oil, tar, oli oil, etc.) incineration has the characteristics of good atomization result, convenient combustion, thorough incineration, flame consolidation, strong rigidity, no coking, no infarction, long service life, etc. Pulverized coal incinerator can burn light oil, heavy diesel oil, heavy oil, residual oil, tar, asphalt, oli oil and other liquid fuels.
The combustion system of pulverized coal incinerator adopts the nitrogen oxygenation factor to separate from the assembly, the heating discharge is all pollution-free, the burning is carbon free and wall free, the boiler furnace is clean, the number of clearing and protection is greatly reduced, the heat obeys up to 65-80%, the temperature rises rapidly, the volume is small, the placement is convenient, the application is reliable, and the cost is low (compared with 1 ton boiler, the incinerator system is only suitable for the ancient fuel incineration Half of the cost of burning the machine). And the oil-gas dual-purpose incinerator building adopts high temperature tolerance, no deformation, scattered heating, no signs of tempering and fire. The electric fan of the incinerator accumulates a large number of dirt and reduces the combustion supporting atmosphere of the output.
The fuel samples shall be taken out of the fuel tank so that the operation of the methanol incinerator can be accurately and accurately described. The commissioning of methanol incinerator is based on the sampling information of incineration flue gas. Any mediation of atmosphere or fuel will affect smoke emissions. Be able to study smoke factors and explain combustion compliance. The following table lists the incineration products and their causes. The cost of pulverized coal incinerator must be protected by methanol incinerator on schedule to avoid shutdown and extend the service life of the incineration system. Connecting the few steps listed above with the initiative proposed by the methanol incinerator manufacturer can determine a useful protection method. This can not only reduce hindrance and after-sales loss, but also improve fuel compliance and reduce fuel costs.
The combustion supporting atmosphere sent from the fan enters the head of the incinerator through the short air supply pipe. When it flows into the incinerator head for burning, the pulverized coal incinerator of Huayi communications in Shaanxi Province creates a high-temperature flue gas return area in the incinerator head, which plays a key role in stabilizing the flame. When the proportion of the space-time combustion supporting atmosphere experienced by the hydrocyclone is higher, the stability of the flame is better, and the flame during burning is also shorter. In view of the corrosiveness of alcohol based fuel, the anti-corrosion pure copper solenoid valve is specially researched and disclosed. The solenoid valve clearly selects (programmable controller) integrated circuit vector control output, so as to avoid the coil magnetic plumpness, control the coil magnetic flux, inhibit the coil starting current, properly control the supply voltage, current and frequency, and guarantee the solenoid valve 24 hours a day under the premise of high temperature and toxicity Run at time.
According to the fuel atomization method, they are: machine atomization incinerator and medium atomization incinerator; according to the layout, they are: integrated incinerator and split incinerator. This split type incinerator is mainly used in industrial production. Its main characteristics are the burning system, air supply system, control system, etc., which are all explained and arranged. This kind of coal powder incinerator for Huayi transportation in Shaanxi Province is mainly suitable for large-scale buildings or high temperature and other external affairs. In contrast, due to the mass production and the low demand for professionalism in the situation trend supply chain, the situation trend selling cost of the product is relatively low, while due to the relatively high demand for professionalism and the lack of demand for professional placement troops, the situation trend selling cost is relatively higher than that of the previous year.
In particular, the flame detector shall be clean and free from water. According to the oil pressure, it is worth adjusting the oil pressure. It is also necessary to constantly check whether the incinerator and its components are stable, loose or not, and whether the status is changed, so as to ensure the normal operation of the incinerator. Only by checking the operation of the fuel oil incinerator on schedule, and doing a good job in the after-sales maintenance of the incinerator in Shaanxi Huayi transportation | pulverized coal incinerator, will greatly improve the obedience of the incinerator and bring more permanent and consolidated operation. The fuel oil incinerator of the unit shall be incinerated. The methanol incinerator has been used for a long time, and the staff are required to maintain and protect it on schedule to increase its service life. On the contrary, low cost affects the company's efficiency.
How to choose the right oil is crucial. Heavy oil is mainly composed of cracked heavy oil, reduced pressure heavy oil, atmospheric pressure heavy oil or wax oil in different proportion. At the time of selection, all requests should be high calorific value, good incineration function, moderate viscosity, small corrosive and solid impurities, easy to store and transport. In addition, viscosity reveals the interest of fuel activity function. The greater the viscosity, the worse the atomization result. It is a very tight quality target and application function target of coal combustion cherishing oil. It simply affects the compliance of oil pump and nozzle and fuel consumption.
——Author：ebico