Do you know the use rules of low nitrogen burner?
The low nitrogen burner is used to regulate the air flow of the first and second gear. When the burner stops running, the damper is closed to reduce the heat loss in the furnace. What standards and codes does it have when it is used?
Fuel: The fuel of low nitrogen burner must meet the requirements of technical parameters. The oil pressure before entering the burner pump must meet the technical parameter specifications, and the inlet and outlet oil pipes of the burner must be sealed. During the installation of oil pipe, foreign matters shall be prevented from entering the pipe. Foreign matters or water shall be prevented from entering the pipeline. In summer, the oil tank shall be filled with oil to prevent condensation.
Clean the oil tank before filling. When entering the power supply, confirm the power according to the operation manual. The low nitrogen burner needs to be grounded. Do not mix the intermediate wire with the live wire, and do not touch the burner with wet hands. Do not pull the wires too tightly and keep away from high temperature sources. Burner and complete set: The burner must be close to the boiler without danger. The consent of the boiler room staff shall be obtained before combustion.
Confirm whether the boiler is filled with water or heat transfer oil, and whether the water circulating valve is open, and then carry out the following operations. The fuel quantity shall be set according to the required output of the boiler and the output ratio of the burner as described in the instructions. Adjust the direction of low nitrogen burner baffle and burner head. Confirm the boiler furnace pressure provided by the boiler manufacturer.
——Author：EBICO